Technical Data Sheet Kristalex? 3100 Hydrocarbon Resin

Application/Uses 

Alluminum-pigment preparations

Assembly

Automotive

Building and Construction Caulks and Sealants

Hot Melt Adhesives

Laminating

Nonwovens

Pressure sensitive adhesives Rubber and Plastic Modification Solventborne Adhesives

Tapes and Labels

Key Attributes

Excellent thermal stability

Intermediate softening point

Made from purified aromatic monomers Water-white initial color

Product Description

Kristalex? 3100 hydrocarbon resin is a water clear, highly color stable, nonpolar, low

molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks. In EVA-based hot melt adhesives Kristalex? 3100 is compatible with EVA grades with up to 18% vinyl acetate and is useful in formulating low-color adhesives with good low temperature properties. In styrenic block copolymer based adhesives Kristalex? 3100 preferentially associates with the styrenic endblocks, producing higher room-temperature cohesion without affecting tack and adhesion properties. Kristalex? 3100 complies with many FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.

Typical Properties

Compatibility and Solubility

Compatible in useful proportions with a wide variety of materials, including styrene-butadiene

rubber (SBR) and SBR block copolymers; neoprene, nitrile, polybutadiene, and acrylic polymers; chlorinated rubber; ethylene-vinyl acetate (EVA) resins; styrenated, vinylated, and drying oil alkyds; rosin ester resins; and ethyl-hydroxy-ethylcellulose (EHEC). Soluble in aliphatic, aromatic, and chlorinated hydrocarbons; esters; and ketones. Insoluble in alcohols and

glycols; limited solubility in nitroparaffins. For low or zero VOC systems Kristalex? 3100 is soluble in the VOC exempt solvents t-butyl acetate and perchlorobenzenetetrafluoride (PCBTF) and will tolerate some acetone and/or methyl acetate as a diluent in solvent systems based

on TBA and/or PCBTF. VOC exemptions and environmental regulations vary regionally and compliance with local standards should be verified before any claims about VOC content are made.

Packaging

Pastilles, in multi-wall paper bags (50 lbs, 22. 7 kg net wt).

Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This

can be accelerated under any of the following conditions: 1) above ambient temperature, 2) prolonged storage, 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.